We are located in sunny San Diego, California.
back to top
Do you have a showroom I can visit?
No, to keep our overhead and prices low, we don’t warehouse our inventory. We either sell it directly from the source or load it onto our semi trailers that are parked and ready to roll.
back to top
I like some cubicles I saw on your website that I am interested in. How can I see one to make sure it is what I want?
No problem, we can either show you the same cubicles that have been installed in another office or pull one off a trailer to show you. Otherwise, we take lots of good photos for you to look at, with detailed descriptions of the paint, fabric color, laminate, condition and accessories. We have been doing this for a long time and you can trust our descriptions and ratings.
back to top
What sizes of cubicles / workstations do you carry?
Our inventory is constantly changing, but here are the standard sizes: Partition heights run 42, 48, 53 and 65 inches, depending on the manufacturer. The 65 inch panels have better acoustics (less noise) and make use of the vertical space with overhead bins and shelves. The shorter panels make for a more collaborative workspace. Panel widths run 24, 30, 36, 42, 48 and 60 inches. Typical cubicle / workstation sizes are (in feet) 6 x 6, 6 x 8, 8 x 8 and 8 x 10 for managerial workstations. However, these are modular and we will size them to fit your workspace.
back to top
How do I pay? Do you accept credit cards?
You can pay by company check or credit / debit card. We require 60% before the installation and the balance upon completion.
back to top
Do you give discounts for large quantities?
The prices listed on our website are very low, so we can move our inventory quickly. We have prices listed for several quantities. If you are buying more than 25 pieces, we may be able to quote you a special quantity price. Use the quote feature in the shopping cart / checkout. Enter the number of the item you want and we will promptly get back to you with a price quote.
back to top
I need to buy only a couple of workstations / cubicles, chairs or desks. Do you sell in small quantities?
We only deal in larger quantities of 10 or more pieces. However, we are part of a large used office furniture referral network and might be able to direct you to someone who has what you are looking for. Email us your request and location. We will have someone contact you.
back to top
What is the cost for delivery and installation?
This depends on:
1. Where you are located.
2. If we have access during normal business hours, Monday through Friday or must this be done on nights or weekends.
3. If you have a loading dock or we need to bring a forklift and driver.
4. Are you located on the ground floor? If not, is there a freight elevator.
back to top
What brands do you carry? How do I know I am getting quality office furniture?
We only deal with quality major brands, not clones: Allsteel, Steelcase, Herman Miller, Hon, Haworth and Knoll. We only buy inventories that are in good or excellent condition or we will refurbish them to such.
back to top
We need lots of workstations / cubicles. How can I make sure they fit? Do you offer space planning?
Yes, we offer space planning, CAD design and on site field measurements from our in house team. Cost of these services is $75 per station; however, we may waive the charges on orders over 10 cubicles / workstations. Hint: It is helpful if you can email us the floorplan of your future facility in a jpeg or dwg file your space.
back to top
Do you have your own installation crew?
Yes, we have our own in house team that has over 20 years experience to handle any size installation.
back to top
Our building requires insurance to cover any work done. Do you have insurance?
Yes, we are bonded and insured. We carry a $5,000,000 policy that meets the criteria of your property management firm. We will fax or email you a copy before the job, if needed.
back to top
Do you buy chairs, desks, reception desks and lobby furniture?
Yes, in large quantities. We will buy all your office furniture, equipment, cubicles and workstations for top dollar. We’ll also buy your phone systems, computers, copiers and even warehouse equipment.
back to top
I have to move quickly and just need to get everything cleared out by the end of the month. Can you do that?
We often will take anything, again in large quantity, to save you removal costs and disposal fees. Less than 5% of what we remove ever ends up in landfills, so we are doing our best to keep our planet
green. We have our own installation and removal crews, so we can move quickly. Let us take it off your hands before your assets become a liability.
back to top
How much can I get for my office furniture, cubicles or workstations?
Go to our
Office Liquidations page and follow our easy 3 step process. There you can upload photos of your office furniture and fill out descriptions, quantity, location and timing. We will promptly review your submission and schedule a site visit if we feel your inventory fits MFC’s standard of quality and condition. Upon inspection, we will be able to give you a very fair quote.
back to top
We are getting a wide variety of quotes for our office liquidation. Why is that?
Many office liquidators might quote you a higher price, on the condition that they will be able to find someone to sell it to before they receive your liquidation. If they don’t find a buyer, they quite often back out at the last minute, leaving you in a desperate situation. MFC has been in business for 21 years. If we commit to buying your inventory, we will buy it. We often get calls from clients in this position.
back to top
Will you buy my 2 office chairs? Can I sell you my workstation / cubicle?
We only buy in large quantities of 25 pieces or more. Craigslist is a great place to sell small quantities of office furniture, quickly and at no costs.
back to top
What is the standard lead-time for any size order, all standard products, fabrics and finishes for refurbished cubicles / workstations?
MFC has a standard lead-time of 2 to 3 weeks for all standard refurbished products.
back to top
What is your warranty on refurbished office furniture?
MFC refurbished products carry a manufacturer’s limited lifetime warranty.
back to top
Is your refurbished office furniture UL listed?
MFC refurbished cubicles and workstations are UL listed and approved to be used alone or with existing installations of like product.
back to top
Has your refurbished office furniture been BIFMA rated?
MFC refurbished cubicles / workstations have been
BIFMA rated, and meet or exceed all industry standards.
back to top
Do you use the same fabrics and finishes on refurbished cubicles and workstations as the original manufacturer’s product?
MFC offers many of the same fabrics, laminates and finishes used on new products, plus we have agreements with all the major mills. MFC uses a powder-coat paint process to assure the most durable finish available today.
back to top
What is the environmental impact of the refurbished cubicles / workstations?
Refurbished products use fewer natural resources. MFC uses a powder-coat paint process which emits no VOC's and no hazardous solvents are required for clean-up. All glues are water-based and non-toxic. Products that cannot be reused in the refurbishing process are recycled. Our products and processes are the best available today for contract furniture.
More on the
green aspect of refurbished office furniture.
back to top
How can you help us capitalize on the investment in the furniture we already own?
MFC has the ability to buy back your existing workstations / cubicles, which can then be used as a credit toward the purchase of our new, used or refurbished office furniture.
back to top
How can I learn more or purchase MFC refurbished cubicles / workstations?
MFC has priced out some refurbished stations or you can fill out a quote form on our
refurbished cubicles / workstations page.
back to top